Gutterguard® - Get Acquainted Special - 3 Gallon Pail
  • Gutterguard® - Get Acquainted Special - 3 Gallon Pail

    Reference # 44


    • (1) Pails of GutterGuard
    • 2 Polyprene Tubes FREE
    • Freight Included (Continental US, AK and CA Excluded)

    Saves you up to $43 with Free Material and No Cost Shipping!


    When gutters leak, problems are just beginning. Deterioration rapidly grows, leaks increase, and replacement soon becomes inevitable.

    However, there is an alternative: reline your gutters with a seamless rubber system. Topps® GutterGuard® is the answer. Use GutterGuard® to seal and reline all types of gutters.

    This extremely tough, remarkable rubber liner goes on by spray or brush, making a perfect custom fit every time. Because it’s made using 100% rubber, GutterGuard® prevents further moisture attack, giving your gutter a durable seal. GutterGuard’s amazing ability to cling to edges works where you need it most — giving extra protection at seams and rivets.

    With GutterGuard®, water and debris build up—a common source for rust and corrosion to develop—is blocked out. After installation of GutterGuard®, your system will flow better and will require less cleaning.

    GutterGuard® is the premier liquid gutter sealant.

    • Seals and relines all types of gutters
    • Tough, hard, and flexible all rubber liner that flows on with spray or brush and becomes seamless when cured onto clean, old metal
    • Prevents further moisture attack - provides seamless seal for gutters


    Ultimate elongation


    Ultimate tensile strength

    1000 p.s.i.

    Water vapor permeability

    0.25 perms


    50% min.




    Q: How much gutter sealant do I need for my roofing project?

    A: Expect to use about two gallons of GutterGuard® per 100 square feet of gutter.

    Q: How is GutterGuard® applied?

    A: GutterGuard® should be applied with a brush or by spray.

    Q: What if I have stubborn rust on my gutter surface?

    A: Before using GutterGuard®, treat the rusted areas with Topps® RustArrestor™ and rinse thoroughly.  Gutters must be completely clean and dry before application.