For Perfect Coating Bonding to Your Bitumen Roof
When resurfacing a bituminous roof it is important to use a powerful bonding product to ensure that your sealant adheres properly to the surface.
BondIt™ is the perfect bonding product for use on your bituminous system. The unique chemistry of BondIt™ strongly adheres Topps Seal® to the bitumen while simultaneously providing a layer of protection against color bleed-through. Apply as a single coat to all well-adhered bitumen, before fixing any problems or applying any coatings.
- Instantly blocks color bleed-through from underlying bitumen
- Assures maximum color development and reflectivity of the top coating
- Enhances Topps Seal® adhesion to BUR, ModBit and other bituminous surfaces
Weight per gallon
9.0 – 10.0 lb.
Dry to touch @ 77° F (50% rel. humidity)
1 gal/100 ft2
Ultimate tensile strength
Q: Why can’t I just apply Topps Seal® to my bituminous roof surface?
A:. It is necessary to prevent bleed-through. BondIt™ creates a barrier between the Topps Seal coating and the bitumen so that bleed-through from the bitumen will not occur.
Q: What does bleed-through refer to on a bitumenous roof project?
A: Topps Seal® adds durability and protection and prolongs the life of your roof. Bitumen distillates can seep into the sealing materials causing discoloration or “bleed-through”. By applying a barrier, like BondIt™ between your roof and the sealant you can prevent this unsightly problem.
Q: What kind of time requirements are involved in using BondIt™?
A: The time required for your project will depend upon the size of the roof you are treating. However, rest assured, when applied according to directions, BondIt™ can dry in as little as two hours.