Roof Maintenance Systems

PROTECT AND EXTEND THE LIFE OF YOUR ROOF WITH A ROOF MAINTENANCE SYSTEM.

Don't replace your roof...restore it with one of our all-in-one Topps maintenance systems.

Why replace 100% of your roof when only 10% is the problem? Roof replacement is disruptive, costly and often completely unnecessary. The Topps® restoration and maintenance system is non-invasive, economical, adds years to the life of your existing roof and typically saves 1/2 to 2/3 the cost of premature replacement.

Topps commercial roofing systems blanket your commercial roof with a seamless, cold-applied rubber membrane that conforms to all surfaces, sealing out the damaging effects of weather and environmental corrosives. They are lightweight, sound deadening, energy efficient and, best of all, there's NO downtime during application.

Interested in a Low-Cost Metal Roof Cooling and Protection System? Check out all of our systems below. 

Low Cost Metal Roof Cooling and Protection

Basic Coating for Metal

This system is designed for minimal-need, low-cost applications for cooling and basic protection of metal  roofs that have a stable substrate, are free of moisture, ponding and have a minimum of 1/4" per foot slope with positive drainage.

Basic coating protection with our ENERGY STAR® certified Topps Seal® provides all of the basic cooling and UV protection benefits.

Use Topps repair and reinforcing compounds selectively as needed.

Calculate Your Price


Basic Coating for Bur/Mod-Bit

This system is designed for minimal-need, low-cost applications for cooling and basic protection of metal roofs that have a stable substrate, are free of moisture, ponding and have a minimum of 1/4" per foot slope with positive drainage.

Basic coating protection with our ENERGY STAR® certified Topps Seal® provides all of the basic cooling and UV protection benefits.

Use Topps repair and reinforcing compounds selectively as needed.


Calculate Your Price


Roof Restoration and Maintenance System for Metal Roofs

System 1000

Metal roofs seldom wear out. They're lost from lack of maintenance. Temperature changes loosen components. Weather erodes the original, thin protective finish. The result is leaks and surface rust.

The Topps® complete, seamless restoration process for Metal Roofs seals, prevents leaks, corrosion and provides an ENERGY STAR€ bright white reflective surface which can drop peak energy cooling demand by up to 15%.

With proper care and a metal roof restoration and/or maintenance program, a metal roof can last for the life of the building. Controls leaks, rust, fasteners and flashings in a timely matter.

Calculate Your Price


System 1000WB (Water Based)

Occasionally, there are situations that require a waterborne restoration system rather than a solvent-borne. Permanently flexible water-based Topps Seal®; WB provides 100% elastomeric protection that is ENERGY STAR™; qualified as a top performing roof coating for cooling.

The specialty weather-resistant protective finish in this solution provides protection and maintenance with near zero VOC for locations where more rigorous VOC standards apply. The totally synthetic coating cures fully into a seam-free membrane that self-adheres to the roof, defending against UV and weathering attack within hours. The excellent repellency, ability to breathe moisture and block efflorescence, make this ideal for most roof types as well as masonry walls.

View Product Details


System 1100 - Concrete

This complete, seamless protective all rubber finish damp-proofs, provides an ENERGY STAR™; bright white reflective surface for your concrete roof that instantly cools and can reduce peak energy cooling demand by up to 15%, simultaneously blocking 100% of the damaging UV from reaching your original roof.

This solution is best when minimal work is required and the performance relies on the integrity of the existing roof.

View Product Details


System 1100 - Mod-Bit-BUR

This complete, seamless protective all rubber finish damp-proofs, provides an ENERGY STAR™; bright white reflective surface for your modified bitumen, or BUR roof that instantly cools and can reduce peak energy cooling demand by up to 15%, simultaneously blocking 100% of the damaging UV from reaching your original roof.

This solution is best when minimal work is required and the performance relies on the integrity of the existing roof. An infrared scan is strongly recommended for membrane roofing followed by replacement of any damaged membrane or damp or damaged substrates prior to coating. Trapped moisture will result in accelerated decay both to the roof and coating.

View Product Details


System 1300

Polyurethane foam requires absolute protection from both UV and weather to perform as external roof insulation. It is vulnerable to UV damage if not coated within five hours of application. Consequently, the choice of a durable coating is incredibly important.

The Topps Seal® liquid applied roof sealant provides seamless protection that weathers both conditions extremely well. Use Topps Seal® solvent based 100% rubber only over new PUF installations for ultimate protection. This system is not for use over previously coated foam. The foam texture must be orange peel or better and in excellent condition applied at PUF manufacturer's specification.

View Product Details


System 1500

EPDM single-ply roofing is widely recognized as among the most resilient materials for flat roofs. Now, they also can be re-clad to brilliant white, Energy Star™ Topps Seal® efficiency with a re-rubber System 1500 application. Protection and white conversion of mechanically adhered EPDM takes effect immediately. The match and compatibility of the Topps® physical properties to EPDM rubber allows the two to become like one. Its low application cost saves waste and landfills, too. With Topps Seal® on top, conversion of your roof to an Energy Star™ roof is complete. You cool your building and expand your roof's performance.

View Product Details


System 1600

Roof maintenance extends the life of PVC roofs that are in sound condition.

This maintenance application resurfaces fully adhered (non-ballasted) roofing that is in sound condition (no splits, tears, hail damage, or leaks) that no longer is covered by manufacturer's warranty. It is for performing roofs with good drainage whose owners are interested in extending the performance of their system by reinforcing the seams and applying a protective ENERGY STAR™ compliant, highly reflective new weathering surface that is designed to cool and protect roofs.

View Product Details


System 1700

This maintenance application resurfaces fully adhered (non-ballasted) roofing that is in sound condition (no splits, tears, hail damage, or leaks) that no longer is covered by manufacturer’s warranty. It is for performing roofs with good drainage whose owners are interested in extending the performance of their system by reinforcing the seams and applying a protective ENERGY STAR® compliant highly reflective new weathering surface that is designed to cool and protect roofs.

View Product Details


System 5000 - Concrete

 

This full service, fully reinforced capping system gives you a maintenance procedure for your Concrete roofing that is well adhered and in sound condition. This durable and completely reinforced system seals, reinforces, and extends the life of well adhered Concrete roofing that needs the extra reinforcement of a continuous mesh that is encased inside the coating.

The 1-step installation procedure after roof preparation incorporates the tough PolyCore™ II polyester web as its core. It applies directly to the existing roof, saving the tear-off labor costs and expense of replacement. The insulation and underlayment must be dry and in good condition. Application goes on without tear-off and business interruption.

View Product Details


System 5000 - Mod-Bit-BUR

This full service, fully reinforced capping system gives you a maintenance procedure for your BUR/ModBit roofing that is well adhered and in sound condition. This durable and completely reinforced system seals, reinforces, and extends the life of well adhered BUR/ModBit roofing that needs the extra reinforcement of a continuous mesh that is encased inside the coating.

The 1-step installation procedure after roof preparation incorporates the tough PolyCore II™ polyester web as its core. It applies directly to the existing roof, saving the tear-off labor costs and expense of replacement. The insulation and underlayment must be dry and in good condition. Application goes on without tear-off and business interruption.

View Product Details