My roof is 100% rusted. What can I do?

Surface rust, while unsightly, is easily removed with the Topps^® roof maintenance system. Once it is treated with Topps RustArrestor™, it is power washed and the powdery substance is removed. The metal then is coated with the solvent-based 100% rubber Topps Seal^® Base Coat. This has a very low perm rating that prevents the two required components for further rusting - oxygen and moisture - from reaching the metal.

Does Topps^® recommend solvent or waterborne elastomeric coatings and why?

Topps manufactures both water based and solvent based roof coatings.Only solvent type coatings provide ultimate metal protection due to their inability to re-absorb moisture that leads to rust. Waterbornes, with a high perm "breathability" rating, are preferred for surfaces that might have to wick moisture (out).

Do Topps^® products move with the normal roof during expansion & contraction?

Yes. Topps 100% rubber membrane has a minimum of 900% elongation once fully cured. This maximum combination with the Topps high tensile strength assures uniform protection. The brilliant white reflective coating cools the roof, further reducing thermal movement along with the need for future roof maintenance.

Is Topps^® an Energy Star partner?

Yes, our brilliant white highly reflective roof coating is approved and carries the Energy Star^® highest rating possible. This certification is your assurance of the most return for your money. Additonally, Topps products are CRRC product rated, Miami/Dade approved, and Title 24 compliant.

What is CRRC^®?

The Cool Roof Rating Council^®  is a not for profit organization that was created to verify the accuracy of reported solar and thermal emittance of roofing products as used to determine energy savings and to provide reliable evidence of conformity.

CRRC membership is available to anyone willing to simply pay a membership fee. But ONLY Product Certification states the level of conformity has been achieved as verified through extensive testing of independent laboratories. The CRRC web site states "Please note that membership in the CRRC is separate and distinct from participation in the CRRC Product Rating Program". In other words, "membership" does not imply a CRRC product rating or approval.

Is Topps Seal^® CRRC rated?

YES! Topps Seal^®  has passed the rigorous testing and carries CRRC accreditation.Solar reflectance is measured in accordance with ASTM test methods C1549, E1918 and E903. Thermal emittance is measured in accordance with ASTM C1371. Aged ratings are exposed for 3 years and are subject to verification periodically through CRRC's random testing program.

Topps Seal's^® CRRC Product Certification is your assurance that you are receiving a roofing product that will provide optimal performance, optimal comfort and energy efficiency. Topps is on the forefront in supplying products that comply with green building programs and local codes.

How much can businesses expect to save by installing Energy Star^® qualified products?

Energy savings vary based upon the geographic location and climate, existing insulation levels in the building, the original surface replaced by the Energy Star^® product, building openings, number of stories and other factors making it hard to accurately predict. However, Energy Star products have been proven to provide a 10-15% reduction in peak air-conditioning demand.

Topps^® cools the roof down during the summer months. What about noise reduction?

Because of the qualities of 100% rubber, Topps Seal^® naturally helps deaden sound. It also resists damage from hail.

Will Ultraviolet radiation be a problem for Topps^®?

The Topps white reflective elastomeric coating, combined with the best UV protective compounds used in the formulation, protects the roof from harmful UV rays with protective UV compounds.

Are Topps^® solvent-based coating products resistant to algae and fungus?

Yes. These are non-porous coatings, so, unlike water based paints and coatings, they lack the open pores that trap moisture and encourage growths that attack and break down ordinary coatings. Any surface deposits are easily cleaned off in the unlikely event they ever occur.

What about gutters?

The Topps GutterGuard™ product has the same vital components used in the rest of the Topps rubber products. Two layers are applied in conjunction with Topps Polyprene^® and PolyCore™ on all the seams, leaving a monolithic seamless seal.

I have skylights that are leaking. Do I need to replace them?

Skylights that are in good shape but have some UV degradation or are leaking, respond well to maintenance. If leaking, they can be removed, the surface below cleaned, and then reseated into a bed of Polyprene^® Trowel Grade rubber before being tightened down. Tightened skylight fasteners should be treated with Topps RivetGuard™. Topps PolyCore™ membrane and Polyprene are used to seal the perimeter. The Topps translucent Sky Coat™ places a protective finish on the skylights that allows light to pass through.

Are Topps^® products chemical and fire resistant?

Topps has high resistance to acid, salt and ammonia - the common factors found in the environment that trigger corrosion. Topps uses special fire resistance additives when additional resistance is required.

How thick is the material when applied?

The finished product in the field will be on average 14 to 21 dry mils, depending on the system being applied. The critical areas where the roofs usually have the worst problems such as seams, fasteners and penetrations have almost double the millage as the field and are reinforced with PolyCore™ and our heavier bodied Polyprene^®.

What type of warranty is offered?

Topps^® has both 5 year and 10-year policies available when completed by an independent certified installer that has attended a Topps training seminar. Coverage is economically extended, if desired, at the end of the initial warranty with a simple cleaning, minor repairs if needed, and a 1-coat application.This provides for the most economical long term care.

What is the difference in cost between Topps^® and new metal?

Topps^® roof maintenance systems typically save 1/2 to 2/3 of the cost immediately. You also eliminate business down time as well as get a leak protection warranty which new metal doesn't provide.When using Topps, you are not getting a new roof, but a better one.

Is there any tax advantage over metal replacement?

Yes. To replace a metal roof you must amortize the expense over many, many years. Maintenance is written off much quicker. We advise you to check with your tax consultant for their opinion on your specific situation.

How many countries is Topps^® used in?

The Topps^® line of elastomeric roof products are used in more than 30 countries.

Who are some customers of Topps Products?

See a partial list of Topps^® clients here.