|
offers you two
options to most efficiently restore and protect these type roofs. The repair
and coating “non-reinforced” system provides you with a durable maintenance
procedure when minimal work is required. It relies more upon the integrity of
the existing roof as it strategically reinforces known critical areas and then
replaces lost weatherproofing components throughout.
The
“reinforced” systems provide you a seamless, lightweight, complete new roof
cap. It extends roof life when the old roof's performance is less predictable
and more extensive protection is needed. This enables total sealing direct to
the old roof without added weight load stress or punctures.
Both
roofs are blanketed with 100% water repellent, UV protected, cool, white,
TOPPS SEAL™.
|
Preparation
The surface must be
clean, dry and free of loose coatings and foreign materials. Using stiff
push brooms and blowers is preferable when water is not needed. |
 |
General
Base Coat™ is engineered for
adhesion and labor savings. It bonds
the PolyCore™ polyester membrane directly to the old roof and prepares it
for the final finish spray coat. |
 |
Installing
PolyCore™ polyester
membrane is installed to reinforce all flashings on all roofs. The
PolyCore™ caps the entire roof with the total roof capping procedure. It is
installed only at critical areas needing reinforcement, on the maintenance
option.
Afterwards, the entire surface is encased in seamless, water-free TOPPS
SEAL™ rubber. White is recommended to reduce thermal stress and the future
need for maintenance. |
 
 |
 |
"For When It's Not A
New Roof You Need, But A Better Roof!"